Substrate | Gauge(mm) | Width(mm) | Length(mm) | Anodic layer(μm) |
AA5005A | 0.3-3.0 (3.5~10mm can be customized) |
1700 (Special width can be customized) |
Coil | 1~25 (Special anodic layer thickness can be customized) |
Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Other | Al |
0.3 | 0.45 | 0.05 | 0.15 | 0.7-1.1 | 0.1 | 0.2 | 0.05 | 0.05 | Other |
Temper | Tensile strength | Yield strength | Elongation at break | HB (only for reference) | |||
Rm [MPa] | Rp0.2 [MPa] | Standard guage [mm] A50mm [%] min. | min. | max. | |||
0.21-0.50 | 0.51-1.50 | 1.51-3.00 | |||||
H14 | ≥ 145 | ≥ 120 | 2 | 2 | 3 | 42 | 54 |
H18 | ≥ 185 | ≥ 165 | 1 | 2 | 2 | 52 | 65 |
H24 | ≥ 145 | ≥ 110 | 3 | 4 | 5 | 42 | 54 |
Density [g/cm3] | Modulus of elasticity [MPa] |
Shear modulus [MPa] | Thermal linear expansion 20-100°C [10-6 / K] |
Thermal conductivity [W / (m*k)] |
Electrical conductivity [MS / m] |
2.69 | 69500 | 26100 | 23.6 | 160-220 | 23-31 |
Property | Surface | Position to rolling dir. | Measurement method | Typical values | |
Roughness |
631E | transverse | ISO 4287 / 4288 profile method |
Ra | 0.3 - 0.6 μm |
transverse | Rz | 2.4 - 3.8 μm | |||
615E | transverse | Ra | 0.2 - 0.3 μm | ||
transverse | Rz | 1.2 -2.2 μm |
Copyright © 2018 rehongda.com
Shenzhen Rehongda Building Technology Co., Ltd 粵ICP備18007647號(hào)